Peaty's Monarch Grip Lock Ring
Peaty's Monarch Grip Lock Ring
Peaty's replacement monarch grip lockrings are available in twelve anodised colour options are made from 6061 aluminium and come with preinstalled 3mm stainless steel allen keys bolts. Torque bolts to a maximum of 3nm.
Features
- Two lockrings with 3mm allen key bolts
- Slimline 8mm wide clamp to maximise grip area
- 6061 aluminium lock rings with stainless steel bolts
- Available in twelve colour options
- Left and right markings on each clamp
- Cardboard only backing board with paper locking wire
- RRP £11.99 / €13.99
Fitting instructions
- Loosen 3mm allen key on lockring.
- Remove monarch grips from bars and pull off old lockrings.
- Re-fit new clamps ensuring the correct side is fitted to the correct grip using the l & r markings engraved above the allen key.
- When fitted correctly the flat edge of the lockring should touch the rubber of the grip and allenkey facing the rider.
- Re-fit grips following Peaty's grip application steps.
- Ride!
In stock at our shop in Bootle.
Ordered in for you. We don't have this one on the shelf, so it takes a little longer: we order it from our supplier, usually dispatched within 5 working days, and confirm a date with you after you buy.
Usually dispatched within 5 working days. Most parts come straight from our UK suppliers. If one is out of stock there, we'll tell you straight away with a date, or refund you if you'd rather not wait. Need it sooner? Call 07534 055758 and we'll check.